• Headphone (1) Pro
• Hardshell case with strap loops
• 3.5 mm audio cable
• USB-C cable
• Quick start guide

Headphone (1) Pro

Hardshell Case

Drivers

Frequency response

Diaphragm

Features

• Tuning with Metropolis Studios
• Spatial audio with head tracking
• Personal Sound
• Flat EQ

Charging

Fast charging

Playback

Talk Time

Microphone quantity

• Total 10 mics
• 5 mic hybrid ANC (single side)

Features

• Transparency mode
• 4 mic algorithm for calls

• Google Fast Pair and Microsoft Swift Pair⁴
• Low latency for responsive user experience
• LDAC and hi-res certified (wired & wireless)
• Lossless USB-C audio up to 24-bit/192 kHz
• Hi-Res AUX audio up to 24-bit/96 kHz
• Broadcast audio
• Wearing detection
• Low lag mode via Bluetooth <15 ms latency via AUX (Flat EQ on)
• IP52 water and dust resistance

Carbon footprint

• 18.3 kg CO2e (third-party verified)

Commitments

• 99% Plastic free packaging
• 100% renewable energy used in final assembly, which helps to reduce carbon footprint

1. The noise cancellation limit of up to 46db is the theoretical maximum limit. This data comes from the Nothing laboratory. Since the actual noise cancellation achieved may vary depending on the specific environment, please refer to the performance of the actual product.

2. 68 hours of audio playback, with the headphone fully charged, Active Noise Cancellation turned off, 50% volume, and with AAC format and the rest of the features at default settings. Test results are based on the Nothing laboratory results (25° C or 77° F). Fast Charge your Nothing Headphone (1) Pro using a standard adapter or Type-C USB charging cable. Requires 5V⎓1A adapter or higher. Actual battery life is affected by volume, frequency and duration of incoming calls, output source, environmental interference, product features used, usage habits and other factors. Actual experience will depend on individual use.


Fast Charge: Once the headphone is out of power, fast-charge for 5 minutes, with Active Noise Cancellation turned off, 50% volume and AAC format and the rest of the features at default settings. After a 5-minute charge, the headphone delivers up to 4 hours of music playback. Charging and battery test results are based on the Nothing laboratory results (25° C or 77° F). Charging and battery life test data was measured using Nothing Power (45W) at an ambient temperature (25° C or 77° F) in the Nothing laboratory. When connected to a type-C cable, Nothing Headphone (1) Pro fully charge from 0-100% in 120 minutes.

3. Latency can be reduced to as low as 120 ms when the headphones are paired with Nothing phone devices, with Game Mode turned on.

4. Before use, please power on to trigger a new device pairing or reconnection. Fast Pair will be available on all supported Android devices running Google Play services 11.7+ with compatibility back to Marshmallow (Android 6.0), while Find My and device renaming support is available from Android 10 onwards.

5. Custom controls need to be turned on with a phone. For devices that are Nothing OS 1.5.6 and above, these functions can be set up in the phone settings by entering the Bluetooth interface. For other devices Android 8.0 and above, or iOS devices 13 and above, you can download and install the Nothing X app to set these up. Nothing Headphone (1) Pro allows customisable controls.

6. Default settings are defined by Nothing. For non-Nothing smartphone users, please download the Nothing X app for more operations. This is available for download on Google Play and iOS App Store. Historical and personal data are managed in accordance with our Privacy Policy. For Nothing OS users, all device settings and customisations are already integrated into Nothing OS version 1.5.6 and higher. All users must update the Nothing X app in Google Play Store before using to ensure all features are up to date.

7. The 15% increase in bass punch and 26% increase in sensitivity of the 40 mm dynamic driver are theoretical relative figures calculated against Headphone (1), based on tests conducted by the Nothing laboratory under specific conditions.

8. The reliability tests are conducted in the laboratory of Nothing and partners under specific conditions. The results may vary in actual environments and different conditions.

9. The headphones feature a glass design with a protective film and have passed a 1.8 m drop test under laboratory conditions. To help protect the glass, avoid dropping the headphones onto hard or sharp surfaces. If the glass is cracked or damaged, please contact customer service for inspection and, where appropriate, repair or replacement.

10. IP52 dust and water resistance: The headphones have been tested under laboratory conditions and are rated IP52 for dust and water resistance. The rating provides limited protection against dust ingress and vertically dripping water under specified test conditions and does not mean that the headphones are waterproof. The IP52 rating is not intended to cover rain, splashes, immersion or excessive sweat. If the headphones malfunction due to liquid or dust ingress, please contact customer service for inspection and, where appropriate, repair.

11. 50,000+ rounds of testing represent the cumulative number of test cycles across multiple durability tests, including charging port, controls, headband, ear cushion, and hinge durability.

12. The ear cushions have been through a range of laboratory tests for overall stain resistance and durability, including exposure to artificial sweat, alcohol, coffee, nail polish, perfume, sunscreen, UV, and more. Test results are based on specified laboratory conditions and do not guarantee resistance to all stains, substances, environmental conditions, or types of wear in actual use.

13. The ear cushions are designed to be removable and reinstalled. After removal, please make sure they are properly reinstalled, as improper installation may affect the seal and ANC performance. If you need guidance on reinstalling the ear cushions after removal, please contact customer service.

14. Nothing Headphone (1) Pro has passed multiple restricted substance tests (including EU RoHS, REACH, etc.), as well as skin irritation and sensitivity tests, to ensure that every substance that comes into contact with the skin has been thoroughly evaluated. Please keep the product clean when wearing it. If your skin develops redness, itching, swelling, or other discomfort after contact with the product, please stop using it immediately and consult a doctor. Few people may have special reactions to specific materials. This may be caused by sweat and humidity in confined spaces, fungal infections, weather, environmental factors, long-term contact with irritants such as soap or sweat, and other factors. If you know you have allergic symptoms or other sensitive reactions, please note that the product contains the following materials: nickel, acrylates, and cyclosiloxanes. IF YOU HAVE KNOWN RISK FACTORS, PLEASE AVOID USING THE PRODUCT.

15. Accessibility of some features may vary across regions. Product pictures and display contents on the foregoing pages are for illustration purposes only. Actual product features and specifications (including but not limited to appearance, colour, and size), as well as actual display contents (including but not limited to backgrounds, UI, and icons) may vary.

16. All data in the foregoing pages are theoretical values obtained by the Nothing laboratory through tests carried out under particular conditions. For more information, refer to the aforementioned product details. Actual data may vary owing to differences in individual products, software versions, application conditions, and environmental factors. All data is subject to actual usage.

17. Due to real-time changes involving product batches, production and supply factors, in order to provide accurate product information, specifications, and features, Nothing may make real-time adjustments to text descriptions and images in the foregoing information pages, so that they match the product performance, specifications, indexes, and components of the actual product. Product information is subject to such changes and adjustments without notice. Please refer to the specific information on https://nothing.tech/. (https://nothing.tech/)